Today, we find our professionals and share with you “the failure process and abrasive wear behavior and role of stainless steel pellet-cutting abrasive”. The reason why we look for this company is that it is the largest professional and well-known stainless steel pellet-cutting | abrasive pellet manufacturer in the locality.
Stainless steel pellets can strengthen the surface of steel, while stainless steel pellets can etch the surface of steel. Mixed abrasives of stainless steel pellets and stainless steel pellets (usually the hardness of stainless steel pellets is 40-50 HRC, and the hardness of stainless steel pellets is 50-60 HRC) can be used on various steel surfaces. Even on C-grade and D-grade corroded steel surfaces, the effect of rust removal is very good. The load-bearing unloading stainless steel pellet cutting box is provided with a top pillar matching with its sliding in the sand box. Sand is arranged in the sand box, and a leak nozzle and a sealing cover are arranged at the bottom of the sand box. It is easy to operate and has a large supporting area. It can bear the load steadily on the supporting platform. When the structure is assembled and the supporting task is completed, the sand in the sand box will leak out under heavy pressure only by opening the leak nozzle. Because the leak nozzle is small, the leak speed is very slow, and the sealing cover of the leak nozzle can be covered at any time according to the need, so that the pressure can be relieved on demand to meet the actual needs of production. The particle size of stainless steel pellets is 0.35-0.45mm, and that of stainless steel pellets is 0.3mm-0.4mm. The usage method of stainless steel surface descaling abrasive is shot blasting parameter adjustment: the shot blasting coefficient is reduced to 1.2-1.3 and the rotational speed of the head is reduced to 1850 rpm/min-1900 RPM in time; the relevant process adjustment: in the stable stage of using abrasive, the heating temperature is gradually increased, so that the plate temperature reaches 1125-1145 rpm, the pressure of brushing roll and the pressure of cleaning water are reduced. Stainless steel pellet cutting
